battery pack tester 5V200A

This equipment is four channel battery  testing system for Li-ion, LiFePO3, Ni-MH, Ni-Cd  and lead acid battery pack up to 50V and 10A max per channel.
1.the hardware of this equipment is reliable, each channel has an independent constant current and constant voltage.
2.High speed data acquisition, catches the change detail of voltage and current precisely
3.Formidable data and curve processing function; perfect report form function, supports four kind of report form types and sorts of report formats
4.With high efficient cooling system, Equipment can work 24 hours with full load
3.Hardware adopts double loop control, can change from constant current to constant voltage without pinnacle, protect battery.
Project index Parameter index
Input Power AC 220V ± 10% / 50Hz
resolution AD 15bit DA 12bit
Input Resistance e1M©
Channel Features Constant Current Source and Constant Voltage Source
Channel Control Mode Independent Control
Voltage Range Charge 10mV~ 5V Discharge 2.5V~ 5V
Accuracy ± 0.1% of range( Full-scale)
Stability 0.10%
Current Range Charge 0.4A~ 100A Discharge 0.4A~ 100A
Accuracy ± 0.1% of range( Full-scale)
Software Protection   Power-down Data Protection
Setting Protection Condition Setting Parameter Low Voltage limit
Upper Voltage limit
Low Current limit
Upper Current limit
Delay Time
Working Temperature Range 0 ~ 40
Storage Temperature Range -10 ~ 50
Working Environment Relative Humidity Range 30% ~ 80% RH
Storage Environment Relative Humidity Range 30% ~ 90% RH